error codes EAK2_11

[padrignola]

We get the error codes at startup

EAK2_11
1 8 0010 1110
9 16 0000 0001
49 56 0011 0010
57 54 0000 0000
any ideas
Could these be the reason our first unit goes on and off pressue intemittently?

[junker1984]

pad - try swapping EAK boards, unit #2 for delivery or feeder, in essence see if the problem is in the board or the printing unit. Pressure intermittent could be an input or a bad solenoid on a directional control valve. What press model?

[padrignola]

the press is an mo with a perfector, 5 units and coating tower

[cesar col]

hi junker, we have a problem at sm 52 4 at startup, apear code #15 in dysplay and cp tronic console.do you speak spanish?, please help .

[junker1984]

No Spanish, I live and work in the US. The number 15 error would indicate the fault lies in the diagnostics or a board in the main electrical cabinet. The error should also come up in either the initiation test screen or the dyhnamics test screen. If a board designation (EAK, SPK, SAk, etc...) is flashing on one of the diagnostcs screens, I would turn the power off and unplug and plug back in each board to reestablish connection. If that doesn't work, it could get quite involved. Good luck.

[letterpresslithoservices]

alot of the time these faults come up due to bad earth on cabinets if its not effecting the press dont worry about it