Heidelberg Repair Forums
Home Forums Register Memberlist Help


Heidelberg Repair Forums » General Heidelberg Related Forums - Offset Presses » Speedmaster » Encoder

Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-10, 04:42 AM
Marco Marco is offline
Junior Member
  
Join Date: Jan 2010
Posts: 1
Default Encoder
Hi I have a problem with the encoder on my speedmaster 10 colour the machine is stopping and we have to switch it off and on again and on the cp tronic is saying that we have a problem with the encoder. So we cleaned it up but still after a while the problem kept on coming so we changed it, we made 15 days working good but again the fault reappears . Any suggestions please

Regards

Marco
Reply With Quote
  #2  
Old 03-02-10, 12:35 PM
Robertwav1's Avatar
Robertwav1 Robertwav1 is offline
Junior Member
  
Join Date: Feb 2010
Posts: 2
Default
I don't know year your press is but see if it has an encoder on the motor as well as the 1st unit. I found out ours did and that the one that was causing the shutdown.
Reply With Quote
Reply


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:05 PM.

This company and site has no affiliation with Heidelberger Druckmaschinen AG... their site can be found at www.heidelberg.com.
Contact Us - Heidelberg Repair Community - Archive - Privacy Statement - Top

A vBSkinworks Design
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.