|
| Home Forums Register Memberlist Help |
|
#1
|
|||
|
|||
|
The machine stops and displays a "T" inside a circle, according to the manual this is an issue of a electronic card, but we cant really find the problem, any help?
Thanks |
|
#2
|
|||
|
|||
|
hello sir we r also having this problem so pls mail me when u get the solution & if i will get it i will be in touch with you thx
|
|
#3
|
|||
|
|||
|
|
|
#4
|
||||
|
||||
|
Alex, Look farther into the diagnostics, sounds like a dynamics test error, maybe a problem with the brake on the main motor or possibly an encoder issue. Go to the wrench 2 icon, and then press the dynamics test (diagnostics while press is in motion) button, and see if any of the card designations (REK, SLT/CON, EAK etc... board) are flashing. Good Luck
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd. |
||